You Will Receive:
– Thermo Electron 3950 Forma Reach-In CO2 Incubator
– x4 Stainless Steel Shelves
– Power Cable
– 90-Day Warranty
Fully Tested and Working Without Issue:
After its initial disinfection and inspection, our technicians tested the Thermo Electron 3950 reach-in CO2 incubator with the following results:
– Temperature at 37°C setpoint: PASSED
– Temperature holds steady and verified: PASSED
– CO2 reading at 5% setpoint: PASSED
– CO2 reading holds steady: PASSED
Notice: This incubator has some cosmetic blemishes. Please review the available photos to see the physical condition before purchasing.
Specifications:
Manufacturer | Thermo Electron Corporation |
Model | 3950 |
Serial No. | 302687-938 |
Mfg. date | 4/21/04 |
Power rating | 100/120V, 50/60Hz, 10.00A, 1Ph |
Interior dimensions (W x D x H) | 31 x 27 x 60 in |
Exterior dimensions (W x D x H) | 38 x 32 x 80 in |
Temperature | |
Control | +/- 0.1°C Microprocessor PID |
Setpoint | Digital – Touch Pad, 0.1°C |
Range | +5°C above ambient to 60°C |
Uniformity | +/- 0.3°C @ +37°C |
Tracking Alarm | User programmable (low) indicator |
Overtemp | Tracking, user programmable, action and indicator |
Display | Digital, LED, 0.1°C increments |
Safety Type | Extreme temperature safety, action and indicator |
Safety Sensor | Thermostat, independent of temperature control system |
Safety Indicator | Message center, audible and visual alarms |
Relative Humidity | |
Selectable Ranges | Medium (>80%), High (>90%) |
CO2 | |
Control | +/- 0.1% microprocessor PID |
Sensor | Thermal conductivity |
Readability | 0.1% |
Range | 0 to 20% |
Inlet Pressure | 15 PSIG (+/- 5 PSIG) |
Display | Digital LED, 0.1% increments |
Shelves | |
Dimensions | 30.62 W x 25.81″ F-B (77.78 x 65.56 cm) |
Construction | Solid stainless steel, 2B finish |
Surface Area | 5.4 sq. ft (0.51 sq. m) per shelf |
Max per Chamber | 145.8 sq. ft (13.55 sq. m) |
Standard | 5 |
Maximum | 27 |
Clearance | Adjustable on 2″ (5 cm) centers |
Fittings | |
Access Port | 2.4″ (6.1 cm) ID, one port per side |
CO2 Inlet | 1/4″ barbed |
Sample Port | Front mount, 1/4″ barbed |
Water Inlet | 1/4″ MPT for automatic fill |
Overflow Drain | 3/8″ MPT |
Condensate Drain | 3/8″ FPT |
Reviews
There are no reviews yet.